Issabel PBX | Outbound Route Setup


1. PBX > PBX Configuration

2. Outbound Routes

3. Create Routes

We are going to create 3 routes for a standard PBX setup

10/11 Digit Dialing Rule
  • Route Name: 10_and_11_Digit Dialing Rule
  • Route CID: Caller ID you want to display
  • Pattern 1: NXXNXXXXXX
  • Pattern 2: 1NXXNXXXXXX
  • Trunk Sequence:
    • 0: Select your Voxtelesys SIP Trunk

911/922 Dialing Rule
  • Route Name: Emergency
  • Route CID: Caller ID you want to display
  • Pattern 1: 911
  • Pattern 2: 922
  • Trunk Sequence:
    • 0: Select your Voxtelesys SIP Trunk

International Dialing Rule
  • Route Name: Interational
  • Route CID: Caller ID you want to display
  • Pattern 1: 011.
  • Trunk Sequence:
    • 0: Select your Voxtelesys SIP Trunk

3. Submit Changes After Each Rule, once all are built Apply Changes
4. All On One Rule?

All of these can be setup under one route if you like!

  • Route Name: OB_Voxtelesys
  • Route CID: Caller ID you want to display
  • Pattern 1: NXXNXXXXXX
  • Pattern 2: 1NXXNXXXXXX
  • Pattern 3: 911
  • Pattern 4: 922
  • Pattern 5: 011.
  • Trunk Sequence:
    • 0: Select your Voxtelesys SIP Trunk

If you need help configuring your trunk or inbound numbers check out the guides below! More Voxtelesys Portal Guides Here!
Issabel PBX Guides